SOYO SY-K8USA DRAGON Ultra User Manual page 53

BIOS Setup Utility
SOYO COMBO Feature
Setting
200~511
CPU Clock
Auto Detect Disabled
PCI Clk
Enabled
Spread Disabled
Stectrum
Enabled
Voltage Select
CPU Vcore
Select
AGP Voltage
Select
DDR Voltage
Select
HT Voltage
Select
Press "Page Up" / "Page Down" key to Over
Clock the CPU Front Side Bus in 1MHz
increment or Press "Enter" key, then type the
desired CPU Front Side Bus
When enabled, this item will auto
detect if the PCI socket have devices
and will send clock signal to PCI
devices. When disabled, it will send
the clock signal to all PCI socket.
This item allows you to
Disabled/Enabled the spread spectrum
modulate.
Setting
Default This function allows you to
adjust the CPU voltage.
0.775~1.7V
Default This function allows you to
adjust the AGP voltage.
1.6V
1.7V
1.8V
Default This function allows you to
adjust the DDR voltage.
2.7V
2.8V
2.9V
Default This function allow you to
adjust the Hyper Transport
1.3V
Voltage.
1.4V
1.5V
SY-K8USA DRAGON Ultra
Description
Description
48
Note
Default
Default
Note
Default
Default
Default
Default