SOYO SY-K8USA DRAGON Ultra User Manual page 104

SATA1/SATA2 Driver Installation
For more information on the ALi M5283 Utility Software, please check the
ALi M5283 manual located in "d:\manual\m5283_raid.pdf" in the Soyo
driver CD.
Installing ALi M5283 during OS Installation
Install driver during Windows XP installation
1. Go to "d:\raid\m5283\floppy" directory, (assuming that your
CD-ROM is drive d:) copy all the files and directory to a
floppy disk.
2. Start installing Windows XP.
3. Windows XP will start to inspect your hardware configuration
4. Press "F6" when the message "Press F6 if you need to install a
third party SCSI or RAID driver...." Appear. Below the screen
5. Press S key to specify additional devices when the Windows XP
Setup window appears.
6. Insert the floppy disk of driver, then press Enter to continue
7. In the follow-on window of device type, please select "M5283
SATA RAID controller (Windows XP)" to continue
8. Win XP will prompt you that a message that the driver is newer
than the default driver, press S (use the driver on floppy) to
continue
9. The follow-on interface will list the devices to be installed, in
which "M5283 SATA RAID controller (Windows XP)" item
should be included. (If users want to install other devices, press "S"
at this time.) Press ENTER to continue Windows XP setup.
Install driver during Windows 2000 installation
1. Go to "d:\raid\m5283\floppy" directory, (assuming that your
SY-K8USA DRAGON Ultra
99