ProCurve 2900 Manual page 112

Web and MAC Authentication
Configuring Web Authentication
ProCurve(config)# show port-access web-based
Port Access Web-Based Status
Auth
Port Clients
----- -------- -------- -------- ------
1 1
2 2
3 4
Figure 3-6. Example of show port-access web-based Command Output
ProCurve(config)# show port-access web-based clients
Port Access Web-Based Client Status
Port Client Name
----- ------------ -------------
1 webuser1
1 webuser2
1 webuser3
3 webuser4
Figure 3-7. Example of show port-access web-based clients Command Output
3-40
Unauth Untagged Tagged
Clients VLAN
1 4006
0 MACbased No
0 1
Syntax: show port-access web-based clients [port-list]
Displays the session status, name, and address for each web-
authenticated client on the switch. The IP address displayed
is taken from the DHCP binding table.
If a web-authenticated client uses an IPv6 address, n/a - IPv6
is displayed.
MAC Address
0010b5-891a9e
001560-b3ea48
000000-111111
000000-111112
Port
VLANs COS
--------
Yes 70000000
Yes
Yes No
IP Address
--------------- -------------
192.192.192.192 Authenticated
n/a - no info
n/a - IPv6
n/a
Session Status
Authenticating
Authenticating
Authenticating