How To Adjust Impedance How To Adjust Impedance; Installation Installation; Brackets That Are Provided - Toa TZ-S60W AS Instruction Manual

4 4 4 4 . . . . HOW HOW HOW HOW TO ADJUST IMPEDANCE TO ADJUST IMPEDANCE TO ADJUST IMPEDANCE TO ADJUST IMPEDANCE
To adjust impedance, use a standard screwdriver to turn the rotary switch located at the back of the speaker
to the desired input power.
Note : Rotary switch is set at position : Note : Note : Note :
• Never set the rotary switch at position "8 " when input terminal is connected with high impedance
amplifier, because it will cause damage to speakers or amplifiers.
• Be sure the position of rotary switch "8 " when input terminal is connected with low impedance amplifier.
5 5 5 5 . . . . INST INSTALLATION ALLATION
INST INST ALLATION ALLATION
5.1. Brackets s s s That Are Provided 5.1. Bracket 5.1. Bracket 5.1. Bracket That Are Provided That Are Provided That Are Provided
The speaker unit is equipped with mounting brackets,
with the mounting location and the desired application.
6
167 / 60W
CAUTION CAUTION CAUTION CAUTION
TZ- - - - S60W AS WALL BRACKET TZ TZ TZ S60W AS WALL BRACKET S60W AS WALL BRACKET S60W AS WALL BRACKET
( ( ( ( This bracket has been pre-installed on the rear of speaker)
as in the picture below. Use the bracket in accordance