General Description; Features; Changing Impedance - Toa CS-761BS-B Instruction Manual

2. GENERAL DESCRIPTION

The CS-761BS-B/761BS-W is a 2-way speaker featuring a coaxially positioned 16 cm cone speaker and
2.5 cm tweeter. This speaker provides high-quality sound broadcasts with excellent clarity, not only indoors, but
also in semi-outdoor facilities such as multistory parking structures, and even in outdoor applications such as
sports grounds and parks. It complies with IP66 Dustproof and Waterproof Standards.
The CS-761BS-B/761BS-W is certified to the European Standard EN 54-24: 2008.

3. FEATURES

• Coaxial two-way speaker construction enables high-quality sound, highly intelligible broadcasts that can
even be used for music output.
• High-powered 60 W rated input.
• Directivity angle of 90° horizontal × 80° vertical.
• Dustproof and waterproof construction complies with the IP66 Standards.
• Certified to EN 54-24, and ISO 7240-24, and compliant with BS 5839-8.
• Can be mounted to a wall, ceiling, pole* or speaker stand* .
1 2
* Optional SP-201 Speaker Mount Bracket and YS-60B Pole Band required.
1
* Compatible with optional ST-34B Speaker Stand. However, this must not be used in permanent installations.
2

4. CHANGING IMPEDANCE

To change the speaker's impedance, rotate the rotary switch located on the rear of the unit using a slotted
screwdriver, and set the impedance for the desired input wattage (factory-preset to 170 Ω).
Rear
Rotary switch
Note: Do not set to the marked position, as this could result in speaker failure.
3