Connecting The Camera - FujiFilm XQ1 Owner's Manual

Flood light
Table of Contents

Advertisement

Viewing Pictures on a Computer

Connecting the Camera

Connecting the Camera
1
If the pictures you wish to copy are stored on a memory card, insert the
card into the camera.
R Windows users may require the Windows CD when starting the software for
the fi rst time.
Q Loss of power during transfer could result in loss of data or damage to internal
memory or the memory card. Charge the battery before connecting the camera.
2
Turn the camera off and connect the supplied USB cable as shown, mak-
ing sure the connectors are fully inserted. Connect the camera directly to
the computer; do not use a USB hub or keyboard.
Q The USB cable must be no more than 1.5 m (4.9 ft.) long and be suitable for data
transfer.
3
Turn the camera on.
4
Upload pictures in MyFinePix Studio and follow the on-screen instructions to
copy pictures to the computer. To exit without copying pictures, click Cancel.
86
Connections

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xq2

Table of Contents