Electrical Connections; Installing Continuity Wire - Mercury Alpha Installation Manual

RETURN HOSE CONNECTION
Typical 3.0L
a -
Seawater or Closed Cooling System
a -

Electrical Connections

IMPORTANT: When routing all wire harnesses and hoses, be sure they are routed and
secured to avoid coming in contact with hot spots on engine and to avoid contact
with moving parts.

Installing Continuity Wire

1. Connect continuity circuit wire from engine to transom assembly.
IMPORTANT: Do not attach any accessory ground (–) wires to transom plate ground
point. Accessory ground wires can only be attached to ground stud on engine.
a -
90-860172011
a
Location For Hot Water Return (T-Fitting Installed in Water Circulating Pump
Hose)
Location For Hot Water Return
Continuity Wire
GASOLINE STERNDRIVE INSTALLATION MANUAL
a
75480
a
INDEX
73572
71651
Page 55 of 137