Table of Contents
Advertisement
9) After installation, open
and close the door several
times and fix then tighten
the hinge screws when the
door operates normally.
Remove the top hinge cover
of the refrigerator door.
Remove the door by
unscrewing the hinge (the
door is supported only by
the bottom hinge) and
remove the hinge washer.
See Figure, at right.
(Continued from previous page)
NOTE FOR AFTER REVERSING THE DOOR
After you have reversed the door, check that the magnetic gasket seals
correctly. It must NOT be creased or crushed so that there is a gap
between it and the inside of the door. It must also seal all around the
door.
In case the seal does not fit perfectly, pull it out and rotate it by 180
degrees.
Should the seal not adhere to the casings of the appliance correctly, it
will have to be heated from a suitable distance using a hair dryer and
lightly stretched in order to attain the required dimensions.
During Transit the door seal may become compressed. Therefore it is
advisable to reform and expand the seal to ensure optimum efficiency of
the appliance. This can be done by running a warm cloth or using a
hairdryer to warm the material and then massaging the seal by hand to
re-enlarge and expand it so that the door is airtight.
31
Hide quick links:
Advertisement
Table of Contents
