Operating Your Log Splitter - MTD 500 Series Operator's Manual

For Parts Call 606-678-9623 or 606-561-4983 For Parts Call 606-678-9623 or 606-561-4983
4
Operating
Your Log
Splitter
WARNING
IMPORTANT
Your log splitter may
be shipped with motor
oil in the engine. You
MUST check the oil
level before operat-
ing. Be careful not to
overfill.
Know Your Log Splitter
Dislodger
Tongue
Jack Stand
Horizontal Beam Lock
Beam Locks
There are two beam locks, one for each operating
position. The vertical beam lock is located next to the oil
filter. The horizontal beam lock is located on the beam
support latch bracket. See Figure 4-1.
www.mymowerparts.com www.mymowerparts.com
Cylinder
Log
Figure 4-1
Engine Controls
See the accompanying engine manual for the location
and function of the controls on the engine.
8
Control Handle
Wedge
Beam Assembly
Vertical Log Cradle
Beam
Lock
Tail Light
(If Equipped)
Vertical Beam Lock