Taking Pictures Using Auto Bracket - Panasonic Lumix DMC-FX9EB Operating Instructions Manual

Taking Pictures using Auto Bracket

In this mode, 3 pictures are automatically
recorded by each press of the shutter
button according to the compensation
range of the exposure.
You can select the desired exposure
among the 3 types of pictures.
1 Press 3 [
] several times until
[ AUTO BRACKET] appears
and then set the compensation
range of the exposure.
AUTO BRACKET
SELECT
• You can select the exposure from
j1 EV to i1 EV in steps of 1/3 EV.
• When you do not use auto bracket,
select [OFF].
• When setting the auto bracket, the auto
bracket icon appears on the lower left of
the screen.
Recording pictures (basic)
• If the remaining number of recordable
pictures is 2 or less, you cannot take
pictures by setting auto bracket.
• When taking pictures using auto bracket
after the exposure compensation, the
pictures are based on the compensated
exposure.
When the exposure is compensated, the
compensated exposure value appears on
the lower left of the screen.
• When the flash is activated or [STARRY
SKY] (P63) in scene mode is selected,
you can take only 1 picture.
• When the auto bracket is activated,
[AUDIO REC.] cannot be used.
• When setting auto bracket and the burst
mode simultaneously, auto bracket will be
performed.
• The exposure may not be compensated
with auto bracket depending on the
EXIT
brightness of the subject.
• Auto bracket is cancelled after switching
the camera off.
• When setting the auto bracket, the auto
review function is activated regardless of
the setting on the auto review function.
(The picture is not enlarged.) Moreover,
the settings for the auto review function on
the [SETUP] menu are disabled.
43
VQT0S67