Peavey MediaMatrix Nion Hardware Manual page 43

Scenario
You want the time and date for all
nodes on the network to be obtained
automatically from a single, master
unit.
You do not want anyone to be able to
assign times and dates to the other
units by accessing them directly.
You will specify the time manually.
June 11, 2012
Actions to take
specify a continent and country.
5. If the country has more than one time zone, in the
Zone list, click the time zone.
Tip: Where a country has only one time zone, you
do not need to make a selection.
6. Under the Zone box, click Set.
On the master node:
1. Navigate to the Time and Timezone tab.
2. Clear the Time Server box.
3. In the Authority list, click Master.
4. Click Set.
If you want to adjust the time and date, perform these
steps on the master node:
1. In the Time (24hr) box, type the new time in the
format HH:MM:SS.
2. In the Date (mm/dd/yy) box, type the new date in
the format mm/dd/yy.
3. Under the Date (mm/dd/yy) box, click Set.
4. If you are using a NION, under Timezone,
specify a continent and country.
5. If the country has more than one time zone, in the
Zone list, click the time zone.
Tip: Where a country has only one time zone, you
do not need to make a selection.
6. Under the Zone box, click Set.
On the other (slave) nodes:
1. Navigate to the Time and Timezone tab.
2. Clear the Time Server box.
3. In the Authority list, click normal.
4. Click Set.
Note: If you try to change the time and date
settings on the slave nodes, they will
automatically change to match the settings on the
master node.
Version 1.6.4b.1
NION Hardware Manual
39