Programming Bar Codes; Set Defaults; Scanning Modes - Motorola Symbol LS4278 Quick Reference Manual

8

Programming Bar Codes

Following are some frequently used programming bar codes.
NOTE For additional host types, refer to the Symbol LS4278 Product
Reference Guide, p/n 72E-69834-xx, available on the website:
http://www.motorola.com/enterprisemobility/manuals.

Set Defaults

Scan SET DEFAULTS to set all parameters to their default values.

Scanning Modes

Scan the appropriate bar code below to determine the scanning pattern.
• SINGLE LINE ONLY - No up and down scan line movement (no raster).
• MULTI-LINE SMART RASTER - The scan line begins as a single line and
moves up and down (rasters) when a partial scan of a bar code is detected, or
no bar code is decoded 500 ms after the trigger is pulled.
• MULTI-LINE ALWAYS RASTER (default) - Rastering (up and down scan line
movement) begins immediately.
MULTI-LINE SMART RASTER
SET DEFAULTS
MULTI-LINE ALWAYS RASTER (Default)
Symbol LS4278
SINGLE LINE ONLY