Quick Reference Guide
Scanning
012345
012345
Beeper Definitions
The scanner issues different beep sequences and patterns to indicate status. The
table below defines beep sequences that occur during both normal scanning and
while programming the scanner.
Beeper Sequence
Standard Use
Low/medium/high beeps
High beep
Four long low beeps
Five low long beeps
Low/high/low beeps
High/high/high/low beeps
Parameter Menu Scanning
Long low/long high beeps
High/low beeps
High/low/high/low beeps
Long low/long high/long low/long
high beeps
Wireless Operation
High/low/high/low beeps
Low/high beeps
012345
012345
Power up.
A bar code symbol was decoded (if decode beeper is
enabled).
A transmission error was detected in a scanned symbol.
The data is ignored. This occurs if a unit is not properly
configured. Check option setting.
Conversion or format error.
ADF transmit error.
RS-232 receive error.
Input error, incorrect bar code or "Cancel" scanned, wrong
entry, incorrect bar code programming sequence; remain
in program mode.
Keyboard parameter selected. Enter value using bar code
keypad.
Successful program exit with change in the parameter
setting.
Out of host parameter storage space. Scan
on page
8.
Pairing bar code scanned.
Bluetooth connection established.
Indication
5
Set Defaults