Table of Contents
Advertisement
Unpacking and Checking Contents
Tools Needed
Medium Screwdriver
Adjustable Wrench
Unpacking
WARNING: To reduce the risk of injury from unex-
pected starting or electrical shock, do not plug the
power cord into a source of power. This cord must
remain unplugged whenever you are working on
the drill press.
The Drill Press is shipped complete in one box.
1. Separate all "loose parts" from packing materials and
check each item with illustration and "Table of Loose
Parts."
WARNING: To reduce the risk of injury, if any parts
are missing, do not attempt to assemble the drill
press, plug in the power cord, or turn the switch on
until the missing parts are obtained and installed
correctly.
2. Remove the protective oil that is applied to the table
and column. Use any ordinary household type grease
and spot remover.
A
B
Combination Square
WARNING: To reduce the risk of fire or toxic reac-
tion, never use gasoline, naptha or similar highly
volatile solvents to remove protective oil
3. Apply a coat of paste wax to the table and column to
NOTE: Make certain all items are accounted for, before
discarding any packing material.
List of Loose Parts
Item
A
B
C
D
E
F
G
C
7
Combination Square Must be True
Draw Light
Line on Board
Along this Edge
Should be no Gap or Overlap when Square
is Flipped Over in Dotted Position
prevent rust. Wipe all parts thoroughly with a clean dry
cloth.
Description
Head Asm. .........................................................1
Table...................................................................1
Column Support Assembly.................................1
Base ...................................................................1
Bag Chuck/Arbor Assembly ...............................1
Bag of Loose Parts.............................................1
Owners Manual ..................................................1
D
F
Straight Edge of
Board 3/4" Thick
This Edge Must be
Perfectly Straight
Qty.
E
G
Hide quick links:
Advertisement
Table of Contents
