Introduction - Jensen VM9313 Installation And Operation Manual

Mobile multimedia receiver
Hide thumbs Also See for VM9313:
Table of Contents

Advertisement

Available languages

Available languages

INTRODUCTION

Congratulations on your purchase of the Jensen VM9313
Mobile Multimedia Receiver.
It's a good idea to read all of the instructions before beginning
the installation. We recommend having your Jensen VM9313
installed by a reputable installation shop.
Features
DVD
Aspect Ratio - Full and Normal
Fast Forward - 2X, 4X, 8X and 32X
Slow Motion - 1/2, 1/4, 1/6 and 1/7
Play, Pause, Stop, Next Chapter and Previous Chapter
CD / MP3 / WMA
CD-Text Compatible
ID3 Tag Compatible
Directory Search (MP3 / WMA Only)
Direct Track Access via Remote Control
Burn up to 1500 MP3 and WMA Files onto a DVD+R /
RW
Audible Forward / Reverse Track Search (CD-DA Only)
Random, Repeat and Intro
Play, Pause, Stop, Next Track and Previous Track
Tuner
HD Radio Tuner*
USA / Europe Frequency Spacing
24 Station Presets (18 FM / 6 AM)
Auto Stereo / Mono
Auto Store
Satellite Radio Ready
Requires XM CNP2000UC and CNPJEN1 (Both Sold
Separately)
Satellite Channel Name, Artist, Song and Categories
displayed on TFT Screen
iPod
High Speed Direct Connect Interface to Access iPod
Playlists, Artists, Albums and Songs. Play music and
view video files from your iPod.
Power Management Charges All iPods While
3
Connected (jLink
Included).
Chassis
1.0 DIN (Import / ISO-DIN Mountable)
Motorized Flip-Out / Flip-Up LCD Screen
8 Character / Segment Type Secondary LCD Display
7" TFT Active Matrix LCD w/ Anti-Glare Coating
336,960 Sub Pixels (1440W X 234H)
Pixel Pitch – 0.321W X 0.370H
Screen Tilt / Angle Adjustment
Heat Management System – Forced Air Cooling to keep
the chip sets operating at nominal temperatures
General
Bluetooth Ready (with purchase of BTM10) providing
hands-free profile for safety / convenience and A2DP
profile for streaming music from a PDA / PMP
44-Key Infrared Remote Control
Two Composite Video Outputs for Additional Screens
Front panel 3.5mm Auxiliary Input for Game Console,
Camcorder, etc.
Rear Audio/Video Auxiliary Input
Navigation Ready (NAV102)
Three-Band Tone control (Bass, Mid and Treble) w/
Eight Preset EQ Curves
Front, Rear and Subwoofer Line Output
Subwoofer Phase Control – 0 ~ 180 degrees
Programmable Volume Control
Rear Camera Input (Normal and Mirror Image View)
Touch Screen Calibration Mode
100-Ohm Preamp Line Output – All Audio Channels
2VRMS Line Output – All Channels
Rotary Encoder Audio Control
SWC Interface – Compatible with PAC adapter SWI-PS
Steering Wheel Control Interface, sold separately
Optional Equipment
NAV102
The VM9313 is "navigation ready." Before accessing
any navigation features, you must purchase and install
the NAV102 navigation module. All installation and
operating instructions will be included with the
navigation module.
Once the NAV102 is connected and operating properly,
the NAV source mode will become active. While the
navigation module is not installed, the NAV option
appears gray, indicating the function is not available.
BTM10
Before you can connect to a Bluetooth enabled device,
you must purchase and install the Jensen BTM10.
Bluetooth Phone
See "Bluetooth Operation" on page 25.
Rear Camera
The VM9313 is "camera ready." Before accessing any
camera features, you must purchase and install a rear
video camera. Once the rear camera is connected and
operating properly, the CAMERA source mode will
1
become active. While the camera is not installed, the
CAMERA option appears gray, indicating the function is
not available.
Satellite Radio Tuner
See "Satellite Radio Operation" on page 15.
iPod
See "MP3/WMA Operation" on page 21.
WARNING! To reduce the risk of a traffic accident
(except when using for rear view video camera) never
use the video display function while driving the vehicle.
This is a violation of federal law.
WARNING! Never disassemble or adjust the unit.
WARNING! To prevent injury from shock or fire, never
expose this unit to moisture or water.
WARNING! Never use irregular discs.
WARNING! To prevent damage to the mechanism inside
this unit, avoid impact to the TFT monitor.
WARNING! Using an improper fuse may cause damage
to the unit and result in a fire.
WARNING! The monitor employs an automatic motorized
mechanism. To prevent damage to the core mechanism,
please do not push, pull or swivel the monitor manually.
*HD Radio™ Technology Manufactured Under License From
iBiquity Digital Corporation. U.S. and Foreign Patents. HD
Radio™ and the HD and HD Radio logos are proprietary
trademarks of iBiquity Digital Corporation.
VM9313

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents