Tuner Operation - Jensen VM9313 Installation And Operation Manual

TUNER OPERATION

About HD Radio™ Technology
HD Radio technology allows CD-quality digital broadcasting
of your local AM and FM radio stations. HD Radio broadcasts
can include multiple channels on the same frequency, which
is called multicasting. With multicasting, you can receive up
to eight additional multicast channels: HD1~HD8. With your
VM9313 radio, you will receive HD Radio digital broadcasts
automatically when tuned to a station that offers HD Radio
technology.
Tuner TFT Display
8 16 1 4 2 5 10
FM 101.9 MHz HD-1
RADIO RADIO
WJHM-FM
Auto HD
E
P1 87.5 MHz
Q
P2 90.1 MHz
P3 98.1 MHz
P4 106.1 MHz
P5 107.9 MHz
P6 102.9 MHz
BAND
Info: Soft Rock & Roll of Yesterday
6 7
9
19
14
11 12
13
BAND 1/2 MEM PROG
15 18
17
1. Current radio band indicator
2. Radio frequency indicator
3. Clock
4. Radio station name (call letters)
5. Tuning mode indicator
6. Preset radio stations: Touch to recall preset stations
7. Program Information: Title, Artist, Type
NOTE: The amount of information displayed when
receiving an HD Radio signal is dependent upon what is
being broadcast. Some stations broadcast their call
letters (name), the artist's name, song title, and category
of music.
8. Touch for quick access to Equalizer level settings
9. Touch to access the direct entry screen
10. HD Radio band indicator
11. |<<: Touch to seek backward
12. >>|: Touch to seek forward
22
3
13. <<: Touch to tune backward one step, including
multicast channels
14. >>: Touch to tune forward one step, including multicast
01:02 PM
channels
15. BAND: Touch to change between AM/FM bands
16. Touch to view the SOURCE MENU and select a new
playback source
17. MEM: View screen used to enter current channel into
preset memory
18. 1/2 or 2/2: Touch this page button to view a second
page of on-screen buttons.
NOTE: In AM mode, there is only one page of on-screen
button options. The PROG button is not visible since
1/2 MEM
Multicast channels are not available for AM stations.
19. : Touch to view the SETUP menu
20. PROG: Touch to view the HD Radio Multicast channel
display
21. A/D: Touch to select Auto, Analog or Digital tuning
mode.
22. HD Radio Signal Indicator
Switching to HD Radio Reception
• Touch the top left corner of the screen (the circle) to
view the SOURCE MENU. Touch "Radio".
• Press the SRC button (6) on the front panel or remote
2/2 A/D control (8) to switch to the AM/FM or RADIO source.
Selecting the AM/FM Band
20
21
Touch the BAND button (15) on the screen, or press the
BAND button on the unit (3) or remote control (30) to select
the AM or FM band.
NOTE: The BAND button on the unit only works when the
TFT is closed.
Selecting a Tuning Mode
Touch the A/D button (21) to choose from the following
modes:
•
•
•
Tuning
Not all FM or AM stations offer HD Radio (digital)
broadcasting. You can receive both analog and digital
stations with the VM9313.
NOTE: In order to receive HD multicast channels, you
must be in Auto or Digital Tuning Mode and the HD icon
(22) must be illuminated.
Seek Tuning
To seek the next station:
•
•
To seek the previous station:
•
•
Manual Tuning
To increase or decrease the tuning frequency one step:
•
•
13
VM9313
Auto: Search for both digital and analog stations.
Analog: Search and broadcast only analog channels.
Digital: Search and broadcast only digital stations.
Touch the >>| button on screen (12).
Press the >>| button (19) on remote control.
Touch the |<< button on screen (11).
Press the |<< button (17) on the remote control.
Touch the or buttons on screen (14, 13).
Press the >> or << buttons (14, 22) on the remote
control.