Table of Contents
Advertisement
The Safety Cover
1.
The transparent Safety Cover (53)
automatically rotates to cover the
Saw Blade (56) when the Cover Case
(89) is lifted. When the Cover Case
is lowered, the Safety Cover rotates
back out of the way.
2.
Do not disconnect or remove the
Safety Cover (53). Do not operate
the Miter Saw if the Safety Cover is
damaged or missing.
3.
If the transparent Safety Cover (53)
becomes so dirty that the Saw Blade
(56) cannot be seen clearly, discon-
nect the electrical Power Cord from
its electrical outlet and clean the
Safety Cover with a soft, damp, cloth.
A mild detergent may be used, but do
not use solvents which may damage
the Safety Cover.
The Trigger
Before plugging in the Miter Saw,
check the operation of the Trigger (98).
Do not operate the Miter Saw if the Trigger
is not operating properly. To turn on the
Miter Saw, simply squeeze the Trigger. To
turn off the tool, release pressure on the
Trigger.
SKU 91995
For technical questions, please call 1-800-444-3353.
The Dust Bag
DUST
BAg
(93)
FIgURE N
1.
The Dust Bag (93) catches and holds
the wood chips and saw dust when
the Miter Saw is in operation.
(See Figure N.)
2.
The
outside diameter of the Dust
Tube (94) is 1-3/4" to which the Dust
Bag (93) or a vacuum hose (not in-
cluded) may be attached. It is recom-
mended that only a qualified techni-
cian perform this procedure.
(See Figure N.)
DUST TUBE (94)
Page 11
Hide quick links:
Advertisement
Table of Contents
