Features; Product Specifications; Ground Terminal; Ac Circuit Breaker - RIDGID RD905712 Series Operator's Manual

Hide thumbs Also See for RD905712 Series:
Table of Contents

Advertisement

Available languages

Available languages

FEATURES

PRODUCT SPECIFICATIONS

ENGINE
Engine Type .......................Yamaha MZ300, 4 Stroke, OHV
Bore x Stroke ............................................. 85 mm x 63 mm
Cooling System ...................................................Forced Air
Compression Ratio ...................................................... 8.1:1
Starting System ......................................................... Recoil
Ignition System ............................................................T.C.I.
Spark Plug .....................................................NGK BPR4ES
Engine Lubricant Volume....................................... 35 fl. oz.
Fuel Volume ................................................................ 6 gal.
KNOW YOUR GENERATOR
See Figure 2.
The safe use of this product requires an understanding of the
information on the product and in this operator's manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.

AC CIRCUIT BREAKER

The circuit breaker is provided to protect the generator
against electrical overload. The circuit breaker may be reset
by pressing the circuit breaker reset button.
AIR FILTER
The air filter helps to limit the amount of dirt and dust drawn
into the unit during operation.

CHOKE LEVER

The choke lever is used when starting the engine.
FUEL TANK
The fuel tank has a capacity of 6 gallons.
FUEL VALVE
The flow of fuel through the generator is controlled by the
position of the fuel valve.
GenSmart™ MONITORING SYSTEM
The GenSmart monitoring system tracks usage and load
and alerts the operator when periodic engine maintenance
is needed.
NOTE: GenSmart
load indicator monitors the load only
for the 120 Volt, 20 Amp GFCI outlets on the removable
control panel. It does not measure load on the 240 Volt,
30 Amp outlet.
GENERATOR
Rated Voltage .....................................................120V/240V
Rated Amps ................................................... 47.5A/23.75A
Rated Output ..........................................................5,700 W
Maximum Output....................................................7,125 W
Rated Frequency ........................................................60 Hz
DIMENSIONS
Length .................................................................... 33.9 in.
Width .......................................................................... 22 in.
Height ...................................................................... 22.5 in.
Weight .................................................................... 190 lbs.

GROUND TERMINAL

The ground terminal is used to assist in properly ground-
ing the generator to help protect against electrical shock.
Consult with a local electrician for grounding requirements
in your area.
OFF SWITCH
To turn the engine off, press and hold the OFF switch until
the engine stops.
OIL CAP/DIPSTICK
Remove the oil fill cap to check and add lubricant to the
generator when necessary.
OIL DRAIN PLUG
When changing the engine lubricant, the oil drain plug is
removed to allow old engine lubricant to be drained.
RECEPTACLES
The following single phase, 60 Hz outlets on the control panel
can be used for operating appropriate equipment, electrical
lighting, tools, and motor loads: 2 x 120 Volt duplex GFCI 20
Amp receptacles, and one 240 Volt AC, 30 Amp receptacle.
RECOIL STARTER GRIP
The recoil starter is pulled to start the machine.
10 — English

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents