Descriptions Of The Options - Electrolux ENV06 Service Manual

8.3

Descriptions of the options

•
Rinse-hold
→ Stops the appliance with water in the tub before the final spin cycle.
→ To drain the water, reset the programme and then select a drain or spin cycle.
•
Night cycle
→ Eliminates all spin phases and adds three rinses in COTTON cycles and two rinses in SYNTHETICS
cycles.
→ Stops the appliance with water in the tub before the final rinse.
→ Eliminates the buzzer (if configured)
→ To drain the water, reset the programme and then select a drain or spin cycle.
•
Pre-wash
→ Adds a pre-wash phase at the start of the cycle with water heating to 30°C (or cold, if selected).
→ In COTTON and SYNTHETICS cycles, performs a short spin before passing to the washing phase.
→ This option cannot be selected for WOOL and HAND-WASH cycles.
•
Soak
→ Adds a pre-wash phase (with duration of 30' with wool cycle movement) at the start of the cycle with water
heating to 30°C (or cold, if selected).
→ In COTTON and SYNTHETICS cycles, performs a short spin before passing to the washing phase.
→ Together with the delayed start option it is possible to select a soak time from 30min to 10 hours.
→ This option cannot be selected for WOOL and HAND-WASH cycles.
•
Stains
→ Adds a 5-minute motor movement phase after heating to 40°C.
→ Ducts water to the pre-wash/stains compartment in order to introduce the special stain-removal product.
→ This option cannot be selected for DELICATES, WOOL and HAND-WASH cycles.
•
Bleach
→ Ducts water through the bleach compartment at the beginning of the first rinse in COTTON cycles.
•
Economy / Energy label
→ Modifies the structure of the COTTON 40-60 and SYNTHETICS 50/60 programmes in order to reduce
energy consumption.
→ Reduces the washing temperature.
→ Increases the duration of the wash phase.
•
Super-rinse
→ Adds two rinses in the COTTON, SYNTHETICS and DELICATES cycles.
→ Eliminates the intermediate spin cycles, with the exception of the final rinse, which is reduced to 450 rpm.
•
Half-load
→ Eliminates one rinse in COTTON programmes.
•
Easy-Iron
→ In COTTON programmes:
adds three rinse cycles
-
eliminates the intermediate spin cycles
-
- performs an impulse spin phase
- adds an "untangling" phase after the spin cycle
→ In SYNTHETICS cycles:
- reduces the heating temperature in 50/60° cycles to 40°C
- increases the washing time
- prolongs the cooling phase at the end of the washing phase
- adds one rinse
- adds an "untangling" phase after the impulse spin cycle
SOI/DT 2007-10 dmm
27/48
599 70 27-90