Changing The Copy Ratio (Copy Ratio); Enlarging/Reducing Originals To A Standard Size (Preset Zoom) - Canon imageRUNNER 3300 Series Copying Manual

Changing the Copy Ratio
You can set the machine to adjust the copy ratio automatically, or to specify the copy ratio for
a job.
NOTE
•
If you want to make copies at the copy ratio of 100%, press "Direct."
Enlarging/Reducing Originals to a Standard Size
(Preset Zoom)
You can enlarge or reduce standard size originals to a standard paper size.
IMPORTANT
•
Place your originals horizontally in the following cases:
- When enlarging LTR-size originals to 11" x 17" or LGL-size paper
- When enlarging STMT-size originals to 11" x 17"-size paper
•
When reducing 11" x 17" or LGL-size originals to LTR-size with Image Orientation Priority set to
"Off," place LTRR-size paper in the paper drawer or stack bypass.
NOTE
•
Placing an original horizontally means setting the original with the longer side sideways.
■ Reduce
The copy ratio set when making reduced copies is as follows:
A
-LGL LTR (78%)
A
-11" x 17"
A
-11" x 17"
A
-11" x 17"
-Minimum (25%)
■ Enlarge
The copy ratio set when making enlarged copies is as follows:
-Maximum (800%)
- (400%)
A
-STMT 11" x 17" (200%)
A
-LTR 11" x 17" (129%)
A
-LGL 11" x 17" (121%)
NOTE
•
The copy ratio of 800% is available only when the original is placed on the platen glass.
A
LGL, 11" x 15" LTR (73%)
LTR (64%)
STMT (50%)
(Copy Ratio)

Changing the Copy Ratio (Copy Ratio)

1
1-27