Power Save; Back Lighting - Uniden UH076SX-NB Owner's Manual

Operation
VOX feature will not work without the VOX Headset
Microphone. The built in mic of UH076SX-NB is temporarily
disabled when VOX feature is working, however accidental
NOTE
pressing of
To activate VOX
1. Press and hold
2. Press either
VOX sensitivity level (9 with the lowest sensitivity to 1 with the
highest sensitivity).
vox
3. Press
4. Install VOX Headset (not supplied) to UH076SX-NB.
To De-activate VOX
1. Remove VOX Headset from UH076SX-NB.
2. Press and hold
3. Press repeatedly and until oF is displayed.
vox
4. Press
Changing the VOX sensitivity setting to oF without removing
the microphone will cause the unit to transmit continuously.
NOTE

Power Save

Battery Save feature extends the battery life by switching the receiver
circuit power ON and OFF. This feature automatically activates during
standby mode (RX mode without signal).

Back Lighting

The Liquid Crystal Display (LCD) and function keys are backlit for easy
viewing at night or in low light situations. The back lighting automatically
switches ON every time a key (except PTT) is pressed. It turns OFF 5
UNIDEN UH076SX-NB
PTT
will cause the unit to transmit briefly.
vox
for 1.5 secs. VOX icon blinks.
or within 10 secs to select the desired
to save the selected level. VOX icon stops blinking.
vox
for 1.5 secs. until VOX blinks.
to save the setting. VOX icon disappears.
23
Handheld UHF-CB Transceiver