Jump-Starting - BMW K 1200 GT Rider's Manual

Replace defective bulb.
7
Bulb of front turn indi-
cators
124
H21W / 12 V / 21 W
Use a clean, dry cloth to
hold new bulb.
z
Press bulb 4 into fitting 3
and install it by turning it
clockwise.
Install bulb socket 3 in lamp
housing by turning clock-
wise.
Close connector 2.
Insert lamp housing into
trim.
Install screw 1

Jump-starting

The wires leading to the
onboard socket do not
have a load-capacity rating
adequate for jump-starting
the engine. Excessively high
current can lead to a cable
fire or damage to the motor-
cycle electronics.
Do not use the onboard
socket to jump-start the
motorcycle.