Using The Dv Cable For Recording (Digital Dubbing) - Panasonic Digital Palmcorder MultiCam PV-GS65 Operating Instructions Manual

≥For more information, refer to the operating
instructions for your TV set and recorder.
≥When you do not need functional indications or
date and time indications, press the [OSD]
button on the remote control for no indication.
(When you connect the Camcorder and a
recorder with the DV cable, these indications
may not appear.)
ª
When neither image nor sound from
the Camcorder is output to the TV set
≥Check that the plugs are inserted as far as they
go.
≥Check the connected terminal.
≥When no image is presented on the TV even if
set [BASIC] >> [AV JACK] >> [OUT/Ë], set to
[OUT]. ( )
-51-
Using the DV cable for Recording
(Digital Dubbing)
By connecting other digital video equipment with
DV terminal and the Camcorder by using the DV
cable PV-DDC9/PV-DDC9-K (optional) 1,
high-image-quality dubbing can be done in digital
format.
≥Set to Tape Playback Mode. (Player/
recorder)
1
Connect the Camcorder and digital video
equipment with the DV cable.
2
Set [ADVANCE] >> [REC STDBY] >> [YES].
(Recorder)
≥You do not have to follow this step when the
remote control is used in the digital dubbing.
3
Start playback. (Player)
4
Start recording. (Recorder)
Move the joystick up to select [
Edit mode
DV
1
DV
¥ ;
/ ] icon.
Or, while pressing the [
remote control, press the [
¥
V
/REW
STILL ADV PAUSE
5
Move the joystick up to select the [
icon again or press the [
remote control to stop recording.
(Recorder)
6
Stop playback. (Player)
ª
To cancel the standby for recording
When the Camcorder is in standby for recording,
move the joystick down and select the [∫] icon.
≥Do not plug or unplug the DV cable during dubbing,
or the dubbing may not be completed properly.
≥If a picture (bilingual video, etc.) containing main
sound and sub sound has been dubbed, select
the desired sound using [SETUP] >>
[AUDIO OUT] on playback.
≥Even if you use a device equipped with DV
terminals such as IEEE1394, you may not be
able to perform digital dubbing in some cases.
For more information, see the instructions for
equipment connected.
≥Regardless of the menu settings on the
recorder, digital dubbing is carried out in the
same mode as the [AUDIO REC] mode of the
playback tape.
≥The images on the recorder monitor may be
disturbed, but it does not affect the recorded images.
≥If a picture containing a copyright protection
signal (copy guard) is recorded by the
Camcorder, the picture is distorted by
mosaic-like patterns at playback.
≥Disconnect the USB cable since input signals
from the external input terminal cannot be
recorded while it is connected with the USB cable.
≥When wide images are input, the display such
as the menu screen or the operation icon is
expanded horizontally.
≥While pictures are input from the DV terminal,
The operation icon blinks on instead of
appearing from the side of the screen when you
press the center of the joy stick.
CAUTION:
Unauthorized exchanging and/or copying of
copyrighted recordings may be copyright
infringement.
¥
REC] button on the
1
] button.
T
REC A.DUB
W
PLAY FF/
W
VOL
STILL ADV
STOP
¥ ;
/
;
] button on the
]
43
LSQT0860