Using The Dv Cable For Recording (Digital Dubbing) - Panasonic NV-GS180EP Operating Instructions Manual

≥For more information, refer to the operating
instructions for your TV set and recorder.
≥When you do not need functional indications or
date and time indications, press the
[EXT DISPLAY] button on the remote control for
no indication. (When you connect the movie
camera and a recorder with the DV cable, these
indications may not appear.)
ª
When neither image nor sound from
the movie camera is output to the TV
set
≥Check that the plugs are inserted as far as they
go.
≥Check the connected terminal.
≥When no image is presented on the TV even if
set [BASIC] >> [AV JACK] >> [OUT/Ë], set to
[OUT]. ( )
-45-
Edit mode
Using the DV Cable for Recording
(Digital Dubbing)
By connecting other digital video equipment with
DV terminal and the movie camera by using the
DV cable VW-CD1E (optional) 1,
high-image-quality dubbing can be done in digital
format.
This model cannot be used as a Recorder.
≥Set to Tape Playback Mode. (Player/
recorder)
1
Connect the movie camera and digital video
equipment with the DV cable.
2
Start playback. (Player)
3
Start recording. (Recorder)
4
Stop playback. (Player)
≥Do not plug or unplug the DV cable during
dubbing, or the dubbing may not be completed
properly.
≥Even if you use a device equipped with DV
terminals such as IEEE1394, you may not be
able to perform digital dubbing in some cases.
For more information, see the instructions for
equipment connected.
≥Regardless of the menu settings on the
recorder, digital dubbing is carried out in the
same mode as the [AUDIO REC] mode of the
playback tape.
≥The images on the recorder monitor may be
disturbed, but it does not affect the recorded
images.
DV
1
DV
39
VQT0T85