Accessories - Panasonic Viera E6G series Operating Instructions Manual

Accessories

Remote Control
(p. 10)
●
N2QAYB000832
Pedestal
(see below)
● Accessories may not be placed all together. Take care not to throw them away unintentionally.
●
For the information of optional accessories, refer to [eHELP] (Support > Optional accessories).
Assembling / Removing the pedestal
Assembly screw (4)
M5 × 16
Assembly screw (4)
M4 × 25
■
Assembling the pedestal
1
Removing the pedestal from the TV
Be sure to remove the pedestal in the following way
when using the wall-hanging bracket or repacking
the TV.
1 Remove the assembly screws
2 Pull out the pedestal from the TV.
3 Remove the assembly screws
Batteries (2)
● R6
(p. 10)
Operating Instructions
Bracket
32-inch model
42-inch model
Base
A
C
D
Secure the base as shown below to prevent the TV
from falling over.
●
The place where the base is secured should be thick
enough and made of hard material.
from the TV.
from the bracket.
Mains lead
(p. 7)
(E6G series) (E6T series)
(E6K series)
(E6S series)
50-inch model
B
3
2
Commercially available screw
(not supplied)
Diameter: 3 mm
Length: 25 - 30 mm
5