Removing The Cablecard Device - Sony KDL-V26XBR1 Operating Instructions Manual

Connecting the TV
z You can also access
information about your
CableCARD device in
the Applications
settings (see page 91).
Removing the
CableCARD Device
30
CAUTION: Inserting the CableCARD device incorrectly may result
in permanent damage to the card and the TV.
2
Gently push the card into the slot until it locks into place, and then
reattach the cover.
3
After 1-2 minutes, the CableCARD device setup screen is automatically
displayed. This screen includes information your cable TV company
will request before they can activate your service.
4
Follow the displayed instructions: Phone your cable TV company. A
representative will guide you through the activation process.
5
After your CableCARD device is activated, your cable TV company
will download the service information, including the channel list, to the
CableCARD device. After the CableCARD device has acquired
channels from your cable TV company, the TV tunes to the lowest
available channel.
In the event you want to cancel your service, contact your cable TV
company.
Once the CableCARD device is removed, your TV will no longer
decrypt digital cable TV programming services that require
CableCARD device.
1
Push the eject button on the TV's CableCARD slot to release the card.
Eject button
2
Pull the CableCARD device straight out of the slot to remove it.
To install a different CableCARD device, follow the instructions in
"Activating CableCARD Service" on page 29.
A U D
I O
R G
B
P C
I N
7