Sony BRAVIA KDL-V32XBR1 Quick Setup Manual

2-599-865-11(1)
KDL-V26XBR1
KDL-V32XBR1
KDL-V40XBR1

Quick Setup Guide

For further information, see the operating instruction supplied with the TV.
Please retain this guide for your future reference.
Please follow the steps to setup your TV:
1 Connecting Your TV
(See reverse side)
2 Running Initial Setup
3
Programming
the Remote Control
For service and technical assistance, call our Customer Information Service Center (Toll Free):
US residents: 1-800-222-SONY (7669)
Canadian residents: 1-877-899-SONY (7669)
DO NOT RETURN TO THE STORE
Sony Corporation © 2005
Printed in Japan
2
Running Initial Setup
1
Press to turn on the TV.
The Initial Setup screen appears.
2
Press V or v to highlight the on-screen
display language. Then press .
The message "First please connect
cable and/or antenna" appears. This may require 50+ minutes for
completion and "Start auto program now?" appears.
3
Press (Yes) to start Initial Setup.
Initial Setup automatically creates a list of
receivable channels from both VHF/UHF
antenna and cable TV channels if both
sources are connected.
When Initial Setup is complete, the TV
will display the total number of analog channels and the total
number of digital channels found.
4
Press to exit this screen.
To run Auto Program again at a later time
Refer to the manual on "Initial Setup" and "Auto Program" sections.
1
Connecting Your TV
Making Audio/Video Connections
Your new TV includes various types of video inputs and two types
of audio jacks; composite-RCA type and digital audio (optical).
Use the outputs/inputs that are available on your components that
provide the best video/audio performances:
Best Audio/Video
Performance
Connector type
Connector type
HDMI
OPTICAL Digital Optical
OUT
(High-Definition Multimedia
Interface)
Digital Coaxial
DVI
(Digital Visual Interface)
Will require an adapter
Will require an adapter to connect to this TV.
to connect to this TV's
digital audio input.
Component video
Analog Audio
S VIDEO
Composite video
RF/Coaxial
Activating CableCARD™ Service
Before you can use CableCARD service,
you need to insert the CableCARD
device (supplied by your cable
AUDIO RGB
PC IN 7
provider) and activate the service.
Inserting the CableCARD incorrectly may result
CableCARD
in permanent damage to the card and the TV.
The connection diagrams shown in the reverse
side are recommendations only; other possible
solutions may exist. Connections that include an
AV receiver can often be complex, so check your
AV receiver's instruction manual for additional details.
See the "Cables Required" chart that appears with the diagram to determine which
cables you'll need. Depending on the components you plan to connect, you may need to
purchase extra cables.
3

Programming the Remote Control

The remote control is preset to operate Sony brand video equipment.
Sony Equipment Programmable Code Number
DVR 772
DVD/VCR 601 (Sony Dream System)
SAT/CABLE 801 (Sony Satellite Receiver)
Follow the steps below to program your TV's remote control to
operate other video equipment.
Find the three-digit code for your equipment from the
"Manufacturer's Codes" listed on right. If more than one code
number is listed, try entering from the code listed first.
MUTING TV/VIDEO POWER TV POWER 1
Press and hold the , or FUNCTION
1
DVD/ SAT/
DVR VCR CABLE TV
button you want to program on the remote control and
press the button simultaneously.
2
3
ENT The selected FUNCTION button ( ,
JUMP ANT MTS/SAP FREEZE
will flash.
SOUND PICTURE TV/SAT WIDE
SUR
1
2
Enter the three-digit manufacturer's code number
using the 0-9 buttons while the button is lit. If code is
not entered within 10 seconds, you must perform the
PREV REPLAY ADVANCE NEXT
step 1 again.
PLAY
3
VISUAL SEARCH PAUSE STOP Press button.
VOL CH
When programmed correctly, the selected FUNCTION
button will flash twice, and when not, it flashes five
REC REC PAUSE REC STOP
times.
TOP MENU MENU F1 F2
To check if the code works
Aim your TV's remote control at the equipment, and press
the green button. If the equipment responds, the
programming is completed. If not, try the next code listed.
TV
If no code is input within the above specified time, or an invalid or incorrect code
number is input, the remote control automatically goes back to the previous setting.
In some cases, you may not be able to program your remote control to operate other
equipment. In such cases, use the equipment's own remote control.
Removing the batteries or dead batteries may cause the programmed codes to be lost
and revert back to the factory setting. Reprogramming the codes may be necessary.
Review the following chart to determine which diagram to use to connect the components in your system:
Turn off and unplug all components before making connections.
DVD
VCR
Player
CableCARD
(optional)
DVD
Cable Box
VCR
Player
Satellite Receiver AV Receiver
DVD
Cable Box
VCR
Player
Satellite Receiver
DVD
HD Cable Box Player
AV Receiver
HD Sat Receiver
Digital Recorder
HD Cable Box
DVD
HD Sat Receiver VCR
Player
HD DVR
Cable Box VCR
Sony
Satellite Receiver
Dream System
Manufacturer's codes
Manufacturer Code
Broksonic 319, 317
DVD Players
Canon 309, 308
Manufacturer Code Citizen 332
Craig 302, 332
Sony 751
Curtis Mathes 304, 338, 309
General Electric 755
Daewoo 341, 312, 309
Hitachi 758
DBX 314, 336, 337
JVC 756
Dimensia 304
Magnavox 757
Emerson 319, 320, 316, 317,
Mitsubishi 761
318, 341
Panasonic 753
Fisher 330, 335
Philips 757
Funai 338
Pioneer 752, 778
General Electric 329, 304, 309
RCA/PROSCAN 755
Go Video 322, 339, 340
Samsung 758
Goldstar 332
Toshiba 754
Hitachi 306, 304, 305, 338
Zenith 760
Instant Replay 309, 308
JC Penney 309, 305, 304, 330,
DVD Changers
314, 336, 337
Manufacturer Code JVC 314, 336, 337, 345,
346, 347
Sony 765
Kenwood 314, 336, 332, 337
Panasonic 766
LG 332
LXI (SEARS) 332, 305, 330, 335,
DVD/VCR Combo Units
338
or ) Manufacturer Code Magnavox 308, 309, 310
Sony 767 Marantz 314, 336, 337
Broksonic 776 Marta 332
Memorex 309, 335
JVC 775
Panasonic 777 Minolta 305, 304
Samsung 774 Mitsubishi/MGA 323, 324, 325, 326
Multitech 325, 338, 321
Toshiba 773
Zenith 768 NEC 314, 336, 337
Olympic 309, 308
HDD/DVD Combo Units Optimus 327
Orion 317
Manufacturer Code
Panasonic 308, 309, 306, 307
Sony 772, 771, 770
Pentax 305, 304
Philco 308, 309
5.1ch DVD AV System
Philips 308, 309, 310
Manufacturer Code
Pioneer 308
Sony (DAV) 601, 602, 603, 604 Quasar 308, 309, 306
RCA/PROSCAN 304, 305, 308, 309,
311, 312, 313, 310,
AV Receivers
329
Manufacturer Code
Realistic 309, 330, 328, 335,
324, 338
Sony 764
Sansui 314
Samsung 322, 313, 321
VCRs
Sanyo 330, 335
Manufacturer Code
Scott 312, 313, 321, 335,
Sony 301, 302, 303 323, 324, 325, 326
Admiral (M. Ward) 327 Sharp 327, 328
Aiwa* 338, 344 Signature 2000 (M.Ward) 338, 327
Audio Dynamic 314, 337 SV 2000 338
Notes on your new TV
Manufacturer Code Wide Mode: Selecting appropriate screen mode will increase
Sylvania 308, 309, 338, 310
enjoyment of your TV viewing.
Symphonic 338
Tashiro 332
Tatung 314, 336, 337 When watching a Standard Definition source (4:3 aspect
Teac 314, 336, 338, 337
ratio) on this TV, you will see bars on both the left and right
Technics 309, 308
Toshiba 312, 311 sides of the screen. Press the WIDE button on your remote to
Wards 327, 328, 335, 331,
332 cycle through different screen modes to fill the screen in
Yamaha 314, 330, 336, 337
various ways. (Wide Zoom enlarges the center, Normal is
Zenith 331
how your TV receives the signal, Full stretches horizontally
Cable Boxes
and Zoom enlarges the image proportionately to fill the
Manufacturer Code
screen.)
Sony 230
Hamlin/Regal 222, 223, 224, 225,
226
When watching a High Definition source (16:9 aspect ratio)
Jerrold/ 201, 202, 203, 204,
General Inst./ 205, 206, 207, 208,
on this TV, you will see screen filled with a image. Press the
Motorola 218, 222
Oak 227, 228, 229
WIDE button on your remote to toggle through different
Panasonic 219, 220, 221
screen modes, especially zooming in to the center of the
Pioneer 211, 214, 215
Scientific Atlanta 209, 210, 211 screen. (Wide Zoom enlarges the center, Full displays the
Tocom 216, 217
image at its original size, Zoom enlarges the image
Zenith 212, 213
proportionately to fill the screen.)
Satellite Receivers
Manufacturer Code
When the TV receives a 720p or 1080i formatted signal, the
Sony 801
Normal mode is not available. See Using WIDE Button section
Dish Network 810
Echostar 810
of the manual.
General Electric 802
Hitachi 805
Hughes 804
Mitsubishi 809
Panasonic 803
Philips 811
If you feel the images on the screen is stretched, press the WIDE button to select a
RCA/PROSCAN 802, 808
different screen mode.
Toshiba 806, 807
Samsung 812
* If an Aiwa VCR does not
work even though you enter
the code for Aiwa, enter the
code for Sony instead.