Whole Unit Sub-Assembly; Cover Base Assy - Samsung SRP-275 Service Manual

5-4 SRP-275 Whole unit Sub-assembly

5-4-1 Cover base assy

Part name
① Cover base
② Frame paper control
③ PMO-roller paper/end -3ea.
④ Switch-paper near end ass'y
(Sub-assembly 5-4-2)
⑤ Screw-tapping (M2×5) -2ea.
⑥ PCB-connector sub ass'y
⑦ Screw-taptite (M3×6) -4ea.
⑧ FPC-16pin
7
2
2
2
Rev. 2.00
1. Attach ② Frame paper control to ① Cover base.
2. Insert three ③ PMO-roller paper/end to ① Cover base.
3. Tighten ④ Switch-paper near end ass'y to ① Cover base with
two ⑤ Screw-tapping (M2×5).
4. Tighten ⑥ PCB-connector sub ass'y to ① Cover base with two
⑦ Screw-taptite (M3×6).
5. Insert ⑧ FPC-16pin in ⑥ PCB-connector sub ass'y.
6. Insert the connector of ④ Switch-paper near end ass'y in
connector of ⑥ PCB-connector sub ass'y.
5
5
4
7
2
1
- 97 -
Assembly procedure
7
7
7
6
SRP-275