Main-Assembly B - Samsung SRP-275 Service Manual

5-2-2 Main-assembly B

Part name
① Gear-RE_A
② Ribbon-feeder ass'y
(Sub-assembly 5-1-2)
③ Gear-RE_C
④ Cover HF gear train
⑤ Lever-ribbon-feeder ass'y
⑥ Washer-plain (ø2.6) -2ea.
⑦ PCB-head ass'y
⑧ FPC-head
⑨ FPC-30pin
⑩ Screw-taptite (M3×4) -3ea.
⑪ Spring-lever-tension
⑫ Carriage head ass'y
(Sub-assembly 5-1-5)
⑬ Belt-round
Rev. 2.00
1. Insert ① Gear-RE_A, ② Ribbon-feeder ass'y and ③ Gear-
RE_C to three shafts of Frame-main.
2. Insert ④ Cover HF gear train to two shafts.
3. Insert ⑤ Lever-ribbon-feeder ass'y to two shafts and then
assemble two ⑥ Washer-plain (ø2.6).
4. Insert ⑧ FPC-head, ⑨ FPC-30pin and the 2pin connector of
Solenoid to ⑦ PCB-head ass'y and then tighten two ⑩ Screw-
taptite (M3×4).
5. Assemble ⑪ Spring-lever-tension between Lever-tension ass'y
and the hook of Frame-main.
6. Insert ⑫ Carriage head ass'y to ⑬ Belt-round and then
assemble Belt-round between Pulley and Assy-gear-pulley. And
tighten Lever-tension ass'y to Frame-main with ⑩ Screw-taptite
(M3×4).
10
8
7
11
10
9
Assembly procedure
12
13
10
6
5
4
1
- 88 -
SRP-275
6
3
2