Table of Contents
Advertisement
a)
Cleaning the brewing system:
Once your prompted to "Drop in cleaning agent" ...
(1) open the lid at the top of the machine,
(2) open the flap of the drop-in slot and drop in a
cleaning tablet.
Close the flap and confirm with "OK. The brew-
ing system is now being cleaned.
1
2
9.6 Cleaning the instant system
Daily cleaning is required when the instant system is
used.
m
Switch off the machine as described under 6.2
and allow it to cool down.
Open the machine door with the key.
a)
Disassembling the mixer unit:
(3) Pull off the instant beverage hose, from the
mixer housing and the beverage spout.
(4) Turn the powder chutes upwards and pull them
off with the enclosed tool.
(5) Remove the instant containers by lifting and
pulling.
(6) Then turn the mixer flange counter clockwise
loose by the small lever.
(7) Now you can pull the complete mixer housing
forward and out.
(8) Extract the mixer impeller off the axle using the
supplied pulling tool.
(9) Now you can also take off the previously loo-
sened mixer flange
6
8
b)
Cleaning the mixer unit:
Thoroughly clean all parts with hot water and a
milk product compatible cleaning agent – or
in the dish washer. Subsequently rinse all parts
with clear water.
Comply dry all parts to avoid agglutination of
instant powder.
On the instant containers clean the open end of
the conveyor screw with a dry dust brush. This is
the point at which you had removed the powder
chutes.
13
5
3
4
7
9
Advertisement
Table of Contents
