3Com OfficeConnect Getting Started Manual page 10

2-6 C 2: I
HAPTER NSTALLING THE
B M
USINESS ODEM
5 Fill in the COM port # and IRQ fields with the COM port and IRQ you wish
to use with your new modem. The "Base I/O Port Address" field will be
filled in with the correct default value. Click OK.
6 The "Ports" screen will appear showing the COM port you just added.
Click OK.
7 Return to the Control Panel and double-click the Modems icon.
8 Click Add.
9 Click Next. Your computer will look for the modem.
10 Once your computer finds the modem, you will see a screen showing that
it has detected a "Standard Modem". Click Change.
11 Click Have Disk.
12 When you see the "Install From Disk" screen, hold down the SHIFT key
while inserting the Connections CD into your CD-ROM drive. Release the
SHIFT key when the light on your CD-ROM drive stops blinking. Then type
D:\ in the text box, and click OK. (If your CD-ROM drive uses a letter
other than D, use that letter instead.)
13 When you see the "Install New Modem" screen, click the manufacturer
of your modem in the first column and then click type of modem you
have in the second column. Then click OK.
14 Write the COM port setting here: ____. Click Next.
15 Click Finish.
WINDOWS 98 AND WINDOWS NT 5.0
1 When Windows detects the modem, hold down the SHIFT key while
inserting the Connections CD into your CD-ROM drive. Release the SHIFT
key when the light on your CD-ROM drive stops blinking. Then click
Next.
2 Make sure the "Search for the best driver for your device" option is
checked. Then click Next.
3 Make sure "CD-ROM drive" is checked and click Next.
4 Windows will alert you that it has found the driver for your modem. Click
Next.
5 If you are prompted for the installation disk, type the location of the CD
(typically D:\, where "D" is the letter name of your CD-ROM drive).
6 Click Finish.
7 If you are asked whether you wish to restart Windows, click Yes.