Table of Contents
Advertisement
2.1.4
ASUS EZ Flash 2 utility
The ASUS EZ Flash 2 feature allows you to update the BIOS without having to go
through the long process of booting from a floppy disk and using a DOS-based
utility. The EZ Flash 2 utility is built-in the BIOS chip so it is accessible by pressing
<Alt> + <F2> during the Power-On Self Tests (POST).
To update the BIOS using EZ Flash 2:
1.
Visit the ASUS website at www.asus.com to download the latest BIOS file for
the motherboard.
2.
Save the BIOS file to a floppy disk or a USB flash disk, then restart the
system.
3.
You can launch the EZ Flash 2 by two methods.
(1) Insert the floppy disk / USB flash disk that contains the BIOS file to the
floppy disk drive or the USB port.
Press <Alt> + <F2> during POST to display the following.
(2) Enter BIOS setup program. Go to the Tools menu then select EZ Flash2
and press <Enter>.
You can switch between drives by pressing <Tab> before the correct file
is found. Then press <Enter>.
2-8
ASUSTek EZ Flash 2 BIOS ROM Utility V3.25
FLASH TYPE:
MXIC 25L8005
Current ROM
BOARD: M3A78-CM
VER:
0303 (H:00 B:02)
DATE:
05/30/2008
PATH: A:\
A:
Note
[Enter] Select or Load [Tab] Switch
[Up/Down/Home/End] Move
Update ROM
BOARD: Unknown
VER:
Unknown
DATE:
Unknown
[V] Drive Info
[B] Backup
[ESC] Exit
Chapter 2: BIOS setup
Hide quick links:
Advertisement
Table of Contents
