Positioning; Reversing The Doors Of Your Appliance - Baumatic BRB2713.5 User Manual

Positioning

o It is advisable that your appliance is only installed in a location
where the ambient temperature of the room, corresponds with
the climate classification that is stated on the rating plate of your
appliance. Your appliance may not function correctly if the
ambient temperature falls outside of the following ranges.
Climate classification Appropriate ambient temperature
SN
N
o Your appliance should not be located in direct sunlight or
exposed to continuous heat or extremes of temperature (e.g.
next to a radiator or boiler).
o The door should be able to open completely and freely.
o The appliance should be situated so you can easily access the
food that is stored in it.
o You should check whether there is an electrical socket available,
which will be accessible after your appliance is installed.

Reversing the doors of your appliance

The doors of your fridge freezer can be set to open from the left or the
right. If you want the doors to be hinged on the left hand side and
opening from the right hand side, you will need to follow the door
reversal process.
IMPORTANT: If required, the doors should be reversed PRIOR
to installing the appliance into the housing unit.
Caution! After unscrewing any of the fixing
hinges, hold the door to prevent it from falling
and causing damage.
Any parts that you remove from the appliance whilst
reversing the door, should be retained for later use.
+10 to +32 degrees centigrade
+16 to +32 degrees centigrade
24