5.9 Main Drive Ass'y
1. Before you remove the Main Drive Ass'y, you should
remove :
- Cover Right (Refer to the 5.7)
2. Unplug the Connector from the Main Motor Ass'y, as
shown below.
Notice : Make sure the Power Switch is turned off
before disassembling the Motor Connector.
3. Remove the Feed1 Gear, as shown below.
Samsung Electronics
Motor
Connector
Feed1 Gear
4. Remove five screws and take out the Main Drive
Ass'y.
5. When separating the Main Motor Ass'y, disconnect
the Connector from the Main Motor Ass'y, remove four
screws, and then remove the Main Motor Ass'y.
Disassembly and Reassembly
Main Drive
Ass'y
Main Motor
Ass'y
Service Manual
5-9