Sensor Status - Samsung ML-4550 Service Manual

4.1.4 Sensor Status

These Functions are to check a current state (normal or not) of each Sensor.
• Usage
- The other sensors
1. Press the Arrow Keys (
2. Press the OK Key , when it is found.
3. Press the Arrow keys until finding a suitable function. (Refer to the table below)
4. Press the OK Key , when it is found.
3. Touch a sensor you would like to test.
4. Check the message on the LCD window for the state of it.
• Function
Sensor
RegiSensor See the message after touching the sensor.
T1 FeedSensor See the message after touching the sensor.
T2 FeedSensor See the message after touching the sensor.
T3 FeedSensor See the message after touching the sensor.
T4 FeedSensor See the message after touching the sensor.
ExitSensor See the message after touching the sensor.
DJam1Sensor See the message after touching the sensor.
Out Bin Sensor See the message after touching the sensor.
Bypass Empty See the message after touching the sensor.
T1 Paper Empty See the message after touching the sensor.
T2 Paper Empty See the message after touching the sensor.
T3 Paper Empty See the message after touching the sensor.
Samsung Electronics
) until finding Component Test / 2.Sensor Status message on the panel.
Description Display (LCD)
Before touching After touching
Regi. Sensor Regi. Sensor
[Without Paper] [With Paper]
T1 Feed Sensor T1 Feed Sensor
[Without Paper] [With Paper]
T2 Feed Sensor T2 Feed Sensor
[Without Paper] [With Paper]
T3 Feed Sensor T3 Feed Sensor
[Without Paper] [With Paper]
T4 Feed Sensor T4 Feed Sensor
[Without Paper] [With Paper]
Exit Sensor Exit Sensor
[Without Paper] [With Paper]
DJam1 Sensor Djam1 Sensor
[Without Paper] [With Paper]
OutBin. Sensor OutBin Sensor
[Normal]
Bypass Empty Bypass Empty
[Empty]
T1 Paper Empty T1 Paper Empty
[Empty]
T2 Paper Empty T2 Paper Empty
[Empty]
T3 Paper Empty T3 Paper Empty
[Empty]
Alignment & Adjustments
Remarks
[Full]
[Present]
[Present]
[Present]
[Present]
Service Manual
4-3