I Assembly/Disassembly; G To Install To The Ip-421/Ip-431 Print Controllers - Konica Minolta KN-303 Service Manual

HOME
Chapter 2 Assembly / Disassembly
Assembly/Disassembly
To Install to the IP-421/IP-431 print controllers (IP-421 shown below)
1. Unfasten 2 screws and remove a halved board from the print controller.
2. Insert the KN-303 into the entrance of the print controller and push deeply along the guide
rail.
3. Insert the KN-303 into the print controller and fasten 2 screws.
2-1 KN-303 Network Interface Card