Warranty - Behringer Tube Ultragain MIC200 User Manual

TUBE ULTRAGAIN MIC200
6.

Warranty

§ 1 Other warranty rights and national law
1. This warranty does not exclude or limit the buyer's statutory rights provided by national law, in
particular, any such rights against the seller that arise from a legally effective purchase contract.
2. The warranty regulations mentioned herein are applicable unless they constitute an infringement
of national warranty law.
§ 2 Online registration
Please do remember to register your new BEHRINGER equipment right after your purchase by
visiting http://www.behringer.com and kindly read the terms and conditions of our warranty carefully.
Registering your purchase and equipment with us helps us process your repair claims quicker and
more efficiently.
Thank you for your cooperation!
§ 3 Warranty
1. BEHRINGER (BEHRINGER International GmbH including all BEHRINGER subsidiaries, except
BEHRINGER Japan) warrants the mechanical and electronic components of this product to be free of
defects in material and workmanship for a period of one (1) year* from the original date of purchase,
in accordance with the warranty regulations described below. If the product shows any defects
within the specified warranty period that are not excluded from this warranty as described under § 5,
BEHRINGER shall, at its discretion, either replace the product by providing a new or reconditioned
product or repair the product using suitable new or reconditioned parts. In the case that other parts are
used which constitute an improvement, BEHRINGER may, at its discretion, charge the customer for
the additional cost of these parts. In case BEHRINGER decides to replace the product, this warranty
shall apply to the replacement product for the remaining initial warranty period, i.e one year* from the
date of purchase of the initial product.
2. If the warranty claim proves to be justified, the product will be returned to the user freight
prepaid.
3. Warranty claims other than those indicated above are expressly excluded.
§ 4 Return authorization number
1. To obtain warranty service, the buyer (or his authorized dealer) must call BEHRINGER during normal
business hours BEFORE returning the product. All inquiries must be accompanied by a description of
the problem. The buyer or his authorized dealer will receive a return authorization number.
2. Subsequently, the product must be returned in its original shipping carton, together with the return
authorization number. The return shipment address will be indicated by BEHRINGER.
3. Shipments without freight prepaid will not be accepted.
§ 5 Warranty regulations
1. Warranty services will be furnished only if the product is accompanied by a copy of the original
retail dealer's invoice. Any product deemed eligible for repair or replacement under the terms of this
warranty will be repaired or replaced.
2. If the product needs to be modified or adapted in order to comply with applicable technical or safety
standards on a national or local level, in any country which is not the country for which the product was
originally developed and manufactured, this modification/adaptation shall not be considered a defect in
materials or workmanship. The warranty does not cover any such modification/adaptation, irrespective
of whether it was carried out properly or not. Under the terms of this warranty, BEHRINGER shall not
be held responsible for any cost resulting from such a modification/adaptation.
3. Free inspections and maintenance/repair work are expressly excluded from this warranty, in par-
ticular, if caused by improper handling of the product by the user. This also applies to defects caused
by normal wear and tear, in particular, of faders, crossfaders, potentiometers, keys/buttons, tubes,
guitar strings, illuminants and similar parts.
Warranty 13