Sapido RB-1232V2 Quick Installation Manual page 12

9
Wired xDSL/Fiber/Cable modem
Choose "Ethernet Port".
Dynamic IP, which is the default, is the most common setting,
and will work with most cable modems. Try this first!
Unfortunately, WAN Access Type varies by company, so if this
does not work please contact your Internet service provider and
ask them what "WAN Access Type" settings to use for your
modem. For example, DSL users may need to use PPPoE or
PPTP, which requires your unique DSL username and password.
This is the name of your wireless network. Change it to something
that will be easy for you to identify (e.g. "Smith Family").
SAPIDO_GR-1733
Change the "Encryption" dropdown to your preferred form
of security. If you are not sure, choose WPA2 (the most
commonly used). This sets the password that will be needed to
log into your wireless network. Enter any wireless network
password that is at least 8 characters.
Click "Finish" to complete Setup.