Mercedes-Benz COMAND Operating Instructions Manual page 88

Additional settings
86
To scroll the map: press the =;
X
9: buttons.
To set the map scale: press the U or
X
T button.
The scale bar appears.
Press the U or T button again.
X
The map view is zoomed in or out.
To add an area to be avoided: press the
X
9 button.
A red square on the map delimits the area
to be avoided.
To set the size of the square: press the
X
U or T button.
The square is enlarged or reduced.
To confirm the setting: press the 9
X
button.
The list appears. The previously selected
area to be avoided has been added and
activated.
If you want to use list functions, proceed
X
according to the instructions described
under "Option 2: the list appears".
Option 2: the list appears
Example display: "Avoid area" list
Select Avoid new area
X
9: buttons and press the 9 button
to confirm.
The map with the crosshair appears.
Proceed according to the instructions
X
under "Option 1: the map appears" if you
wish to set a new area to be avoided.
The following illustration shows an example
with two areas that are to be avoided.
Area currently being avoided
:
New area to be avoided, the size of which
;
can still be adjusted
Switching an avoided area on/off
Select an entry in the list using the
X
9: buttons and press the 9 button
to confirm.
The avoided area is switched on O or off
ª depending on the previous status.
using the