Mercedes-Benz COMAND Operating Instructions Manual page 176

AUX mode
174
Select Source
X
press the 9 button to confirm.
Select Disc Drive Aux
X
button to confirm.
You will hear and see the content of the
external video source if it is connected to
the CD/DVD drive and switched to
playback. If no video image is available
from the AUX source connected, you will
see an audio menu.
Displaying AUX
Select the screen to which an external
X
video source is connected and which you
would like to operate with the remote
control ( page 31).
Y
Select Aux in the menu using the
X
9=; buttons on the remote
control and press the 9 button to confirm.
Select Source
X
press the 9 button to confirm.
Select Display Aux
X
button to confirm.
You will see and hear the content of the
video source if it is switched to playback. If
no video image is available from the AUX
source connected, you will see an audio
menu.
Selecting the active COMAND source
Select Aux in the menu using the
X
9=; buttons on the remote
control and press the 9 button to confirm.
Select COMAND
X
press the 9 button to confirm.
Select COMAND Audio
X
and press the 9 button to confirm.
COMAND audio: the audio mode selected
for COMAND is also selected for the Rear
Seat Entertainment System.
COMAND video: COMAND transmits the
video image to the Rear Seat Entertainment
System.
from the AUX menu and
and press the 9
from the AUX menu and
and press the 9
from the AUX menu and
or COMAND Video
Operation with an active COMAND
source
You can transfer an audio or video mode
selected in COMAND to the Rear Seat
Entertainment System.
i
If you then switch modes in COMAND, the
new source will not be transmitted to the
Rear Seat Entertainment System.
To switch on the function in COMAND:
X
switch to the desired audio mode in
COMAND or show the menu when in video
mode.
Select the menu item at the bottom left,
X
e.g. CD, using the :=; buttons
on the remote control while CD mode is
switched on.
Select Active Aud./Vid. Source for
X
the Rear.
In the status bar at the top, you will see the
headphones icon and the _ icon for the
source that has been switched on.
To switch off the function in COMAND:
X
switch to the desired audio mode in
COMAND or call up the menu system when
in video mode.
Select the menu item at the bottom left,
X
e.g. CD, using the :=; buttons
and press the 9 button to confirm.