Mercedes-Benz COMAND Operating Instructions Manual page 26

Operating COMAND
24
Enter O, D, E, L, CI, T,
X
appropriate buttons.
Further functions in the list with
character bar
To delete a character: select the 2
X
icon at the bottom right in the character bar
using the =;9: buttons and
press the 9 button to confirm.
or
Press the 2 button.
X
To delete an entry: select 2 and press
X
and hold the 9 button until the entire entry
has been deleted.
or
Press and hold the 2 button until the
X
entire entry is deleted.
To switch the character set: select
X
B and press the 9 button to confirm.
This switches between the Latin and the
Cyrillic character set.
To cancel an entry: select the & icon in
X
the bottom left of the character bar and
press the 9 button to confirm.
or
Press the k back button.
X
The address entry menu appears.
To accept the first list entry: press and
X
hold the 9 button until the address entry
menu appears.
The accepted list entry is shown there.
Calling up the list as a selection list
Select the desired city from the selection list.
If there are several entries for a city or if
several cities of the same name are stored,
then ¬ is highlighted in the character bar.
Press the 9 button.
X
Y using the
It is also possible to switch the city list to the
selection list at any time during character
input.
Press the 9 button repeatedly until the
X
city list appears as a selection list.
or
Select the ¬ icon in the character bar
X
using the ;9: buttons and
press the 9 button to confirm.
Option 2: city list as selection list
COMAND either shows the selection list
automatically or you can call up the selection
list from the list with character bar.
The example shows the selection list after
entering the city DENT. The entry is
highlighted automatically.
Select a list entry using the 9:
X
buttons and press the 9 button to confirm.
The address entry menu appears. You can
now enter a street, for example.
i
You will find further information in the
"Destination entry" section ( page 48).
Y