Adding And Clearing Channels And Inputs In The History List; Tuning To The Next Programmed Channel; Tuning To A Specific Channel (Programmed Or Unprogrammed) - Toshiba 24L4200U User Manual

64
Using the TV's features
Tuning channels using the Channel Browser™

Adding and clearing channels and inputs in the History List

As a channel or input is tuned, the Channel Browser™ adds it to the
History List and displays it on the right side of the Channel
Browser™. Previously tuned channels/inputs are shifted to the left,
eventually moving off the left side. Press the BACK CB arrow
button to surf backward through the previously tuned
channels/inputs. Any channel or input that is tuned repeatedly will
not be repeated in the History List, but instead is moved to the end
of the list on the right side of the Channel Browser™.
The Channel Browser™ will store the following channels:
❖
All channels that are tuned using the numeric buttons on the
remote control.
❖
All channels that are tuned using the CH arrow buttons on the
remote control.
NOTE
Clearing channels from the History List:
❖
Reconfiguring the ANT/CABLE input will clear the History
List. see
❖
Turning off the TV will clear the History List.

Tuning to the next programmed channel

To tune to the next programmed channel, press the CH arrow
buttons on the remote control or TV control panel.
NOTE

Tuning to a specific channel (programmed or unprogrammed)

To tune analog channels:
❖
Press the Channel Number (0–9) on the remote control. For
example, to select channel 125, press 1, 2, 5, and then press the
ENTER button.
Whenever an item is selected that cannot be tuned (for various
reasons), the TV will automatically tune to the previously viewed
channel or input.
"ANT/CABLE IN" on page 47
This feature will not function until you have programed channels into
the TV's channel memory, see
(optional)" on page
"Storing channels in memory
48.