❖
Repeatedly press the INPUT button on the remote control
or TV control panel to change the input setting.
The current signal source displays in the top right corner of the
Input Selection screen.
(Sample Image) Input Selection screen
NOTE
❖
❖
❖
❖
If a REGZA-LINK
(e.g. Audio Receiver) is connected to the HDMI
INPUT button on the remote control or TV control panel
repeatedly to highlight HDMI 1 or HDMI 2.
If the connected CEC device has any connected devices, a separate
device selection pop-up window appears:
(Sample Illustration) HDMI
Selecting the video input source
You can label the video input sources according to the specific
devices you have connected to the TV, see
input sources" on page
Sources can be "hidden," see
on page
58.
"No video signal" will appear randomly on the screen if no
signal is received in video input mode.
If a CEC device is connected to an HDMI
®
REGZA-LINK
icon appears.
®
device with HDMI
Using the TV's features
58.
"Labeling the video input sources"
®
switching capability
®
setting pop-up window
57
"Labeling the video
®
input, the
®
input, press the