Dodge 2014 Dart User Manual page 47

Voice Command Operation
• Start a dialogue by pressing the "Voice Command" button
The beep is your signal to give a command. Below are a list of voice commands for each
of the different modes.
Common Voice Commands (Examples)
Main Menu
Radio AM, Radio FM Modes
SiriusXM Satellite Radio Mode
Disc Mode
USB Mode
Bluetooth Streaming (BT) Mode
ELECTRONICS
"Radio AM" (to switch to the radio mode)
"Radio FM" (to switch to the radio mode)
"Satellite Radio" (to switch to the radio mode)
"Disc" (to switch to the disc mode)
"USB" (to switch to the USB mode)
"Bluetooth Streaming" (to switch to the
Bluetooth® mode)
"Memo" (to switch to the memo recorder)
"System Setup" (to switch to system setup)
"Frequency" (to change the frequency)
"Next Station" (to select the next station)
"Previous Station" (to select the previous
station)
"Radio Menu" (to switch to the radio menu)
"Main Menu" (to switch to the main menu)
"Channel Number" (to change the channel by
its spoken number)
"Next Channel" (to select the next channel)
"Previous Channel" (to select the previous
channel)
"List Channel" (to hear a list of available
channels)
"Channel Name" (to change the channel by
its spoken name)
"Radio Menu" (to switch to the radio menu)
"Main Menu" (to switch to the main menu)
"Track" (#) (to change the track)
"Next Track" (to play the next track)
"Previous Track" (to play the previous track)
"Main Menu" (to switch to the main menu)
"Next Track" (to play the next track)
"Previous Track" (to play the previous track)
"Play" (to play a Artist Name, Playlist Name,
Album Name, Track Name, etc.)
"List" (to List a Artist, Playlist, Album, Track,
etc.)
"Next Track" (to play the next track)
"Previous Track" (to play the previous track)
, you will hear a beep.
45