Dodge 2014 Dart User Manual page 46

ELECTRONICS
• Only the phonebook of the currently connected mobile phone is accessible.
• Only the mobile phone's phonebook is downloaded. SIM card phonebook is not part of the
Mobile phonebook.
• This downloaded phonebook cannot be edited or deleted on the Uconnect® Phone.
These can only be edited on the mobile phone. The changes are transferred and updated
to Uconnect® Phone on the next phone connection.
Making A Phone Call
• Press the "Phone" button
• After the BEEP, say "dial" (or "call" a name).
Receiving A Call – Accept (And End)
• When an incoming call rings/is announced on Uconnect®, press the Phone button
• To end a call, press the Phone button
Mute (Or Unmute) Microphone During Call
• During a call, press the "Voice Command" button
• After the BEEP, say "mute" (or "mute off").
Transfer Ongoing Call Between Handset And Vehicle
• During a call, press the "Voice Command" button
• After the BEEP, say "transfer call".
Changing The Volume
• Start a dialogue by pressing the "Phone" button
normal call.
• Use the radio ON/OFF VOLUME rotary knob to adjust the volume to a comfortable level
while the Uconnect® system is speaking. Please note the volume setting for Uconnect® is
different than the audio system.
Uconnect® Voice Command
• The Uconnect® Voice Command system allows you to control your AM, FM radio, satellite
radio, disc player, Uconnect® Phone and supported portable media devices.
• When you press the "Voice Command" button
will hear a beep. The beep is your signal to give a command. If you do not say a command
within a few seconds, the system will present you with a list of options. If you ever wish to
interrupt the system while it lists options, press the "Voice Command" button
listen for the BEEP, and say your command.
44
.
.
.
.
, then adjust the volume during a
located on the steering wheel, you
.
,