MODELS: WD-60C9 / WD-65C9 / WD-73C9 / WD-60737 / WD-65737 / WD-73737 / WD-82827
Horizontal and Vertical Position Adjustment
1. Enter the Service Mode <MENU><2-4-5-7> .
2. Select the Geometry Test Pattern shown below <
3. If necessary, select the adjustment, "1.HVPOS" <
SERVICE
TVM
4. After selecting the HVPOS adjustment item, use the Navigation <
• If a Up/Down <
• If a Right/Left <
5. Press <ENTER> to save the adjustment data.
Index Delay Adjustment
1. Enter the Service Mode
2. Select the Ramp Pattern shown below
3. Select the adjustment, "60.IDL"
SERVICE
TVM
60.IDL
4. After selecting the IDL adjustment item, use the Navigation <
bars so they are smooth and solid. HINT: The data value is typically in the mid 30's.
5. Press <ENTER> to save the adjustment data.
WD-65837 / WD-73837 / WD-82837
Adjustment
Data (HPOS)
Data (VPOS)
1.HVPOS
-3
4
> button is pressed, the vertical position and VPOS adjustment data changes.
>button is pressed, the horizontal position and HPOS adjustment data changes.
<MENU><2-4-5-7>
<
<
>.
Adjustment
Data
35
><
>
x2.
>.
.
><
> x3.
> buttons to adjust the Ramp Pattern color
Page 32
> buttons to center the display.