IBM TotalStorage NAS 300 User Reference page 158

Table 25. POST error codes (continued)
Error code/symptom
1762
178X
1800
1962
2400
2462
5962
8603
0001200
00012000
00019501
00019502
144
NAS Gateway 300 User's Reference
Meaning
Hard disk configuration error.
Fixed disk error.
No more hardware interrupt
available for PCI adapter.
Drive does not contain a valid
boot sector.
Video controller test failure.
Video memory configuration
error.
IDE CD-ROM drive
configuration error.
Pointing-device error.
Machine check architecture
error.
Microprocessor machine
check.
Microprocessor 1 is not
functioning - check VRM and
microprocessor LEDs.
Microprocessor 2 is not
functioning - check VRM and
microprocessor LEDs.
Part/action
1. Hard disk drive.
2. Hard disk cables.
3. Run the Configuration/Setup Utility program.
4. Hard disk adapter.
5. SCSI backplane.
6. System board.
1. Hard disk cables.
2. Run Base System Diagnostics.
3. Hard disk adapter.
4. Hard disk drive.
5. System board.
1. Run the Configuration/Setup Utility program.
2. Failing adapter.
3. System board.
1. Verify that a startable operating system is
installed.
2. Run Base System Diagnostics.
3. Hard disk drive.
4. SCSI backplane.
5. Cable.
6. System board.
System board
System board
1. Run the Configuration/Setup Utility program and
load the default values.
2. CD-ROM drive.
3. CD-ROM power cable.
4. IDE cable.
5. System board.
6. Battery.
1. Pointing device
2. System board
1. Microprocessor 1
2. Optional microprocessor 2
1. Microprocessor
2. System board
1. VRM 1
2. Microprocessor 1
3. System board
1. VRM 2
2. Microprocessor 2