Table of Contents
Advertisement
Using your corded base
3. Using the phone
3.1
Calls
3.1.1
Make a call
1. Lift the handset and dial the number.
3.1.2
Preparatory dialling
1. Dial the number first. If you make a mistake press
to delete the last digit.
2. Lift the handset to dial.
3.1.3
End a call
1. Place the corded handset back on the telephone base.
3.1.4
Receive a call
When you receive a call, the base rings and
the display.
1. Simply lift the corded handset to answer the call.
3.2
Adjust the earpiece volume
1. During a call, press
volume. There are 5 levels to choose from.
3.3
Mute
You can mute your base so that you can talk to someone
nearby without your caller hearing.
16
flashes on
or
to increase or decrease the
1. During a call, press
your caller cannot hear you.
2. Press
again to resume your call.
3.4
Intercom
3.4.1
Make an internal call
You can make internal calls between the base and handset,
or if you have more than one handset registered to the
base, you can make internal calls between two handsets.
1. Press on the base. All registered handset will ring
3.4.2
Receive an internal call
1. Lift the handset to answer the call.
Note
If during an internal call you receive and an incoming call,
you will hear the alert tone on the base.
Press
to put your internal caller on hold and answer the
call. When you end the external call the handset will
return to the internal call. Or press
internal and external caller.
3.4.3
Transfer a call
1. Press on the base. All registered handset will ring.
2. When the internal call is answered, place the corded
handset on the corded base to complete the transfer.
. The display shows
and
to switch between the
Using the phone
Advertisement
Table of Contents
