Panasonic Viera TH-P65VT30D Operating Instructions Manual page 37

Gamma
• S Curve /
1.8 / 2.0 /
2.2 / 2.4 / 2.6
More Detailed
Adjustment ∗
3
Reset to Defaults
Intelligent Frame
Creation
• Off
• Mid
• Max
24p Smooth Film
• Off
• Mid
• Max
Film Cadence
Detection
• Off
• On
3D Refresh Rate
• Auto
• 100Hz
• 120Hz
Resolution
Enhancer
• Off
• Mid
• Max
Side Panel
• Off
• Low
• Mid
• High
16:9 Overscan
• Off
• On
AV Colour System
• Auto
• PAL
• SECAM
• M.NTSC
• NTSC
Colour Matrix
• SD
• HD
Switches the gamma curve
•
Please note the numerical values are reference for the adjustment.
Adjusts more detailed Gamma items
[Input Signal Level]: Adjusts the input signal level
[Gain]: Adjusts the gain of gamma for selected signal level
[Reset to Defaults]:
Press the OK button to reset to the default detailed Gamma
Press the OK button to reset to the default Gamma
Automatically compensates the picture frame rate and removes juddering
movements to make the images smooth and clear
•
Depending on the contents, images may be noisy. To prevent the noise,
change the setting.
•
This function is not available for selection (default to [Off]) when [Viewing Mode]
is set to [Game] or in the mode of PC input or Network service operations.
Automatically compensates the picture frame rate to make the 24p
source movie images smooth
•
This is available only for 24p signal input and displayed instead of
[Intelligent Frame Creation].
•
This function is not available for selection (default to [Off]) when [Viewing Mode]
is set to [Game] or in the mode of PC input or Network service operations.
Automatically makes the film source movie images clear
Changes the setting of the high-speed motion picture response
Enhances the picture resolution to make the image sharper
•
This function is available for SD (Standard definition) signal.
•
As for HD (High definition) signal, this function is available when aspect
mode is set to [16:9] ([16:9 Overscan] is set to [On]), [4:3 Full] or [Zoom].
•
Not valid on VIERA Connect and Media Player
Increases the brightness of the side panel
•
The recommended setting is [High] to prevent panel "image retention".
[On]: Default - Image is overscanned by ~5% beyond the edge of the
screen to hide edge video noise
[Off]: Displays image in its original size including edge video noise such
as lines, dashes, dots etc.
•
Applicable for video signals when TV aspect is set to [16:9]
•
Memorised separately for SD and HD channels / signals
Selects optimum colour system based on video signals in AV mode
Available only with 480p or 576p input on video signals in a natural
colour from digital equipment connected to AV1 component or HDMI1 /
HDMI2 / HDMI3 / HDMI4 terminals. Select [SD] or [HD] to adjust suitable
colour parameters for [SD] (Standard definition) or [HD] (High definition)
•
[SD]: Input signal is a normal TV system
•
[HD]: Input signal is a high definition system
37