Panasonic Viera TH-P65VT30D Operating Instructions Manual page 28

Charging the 3D Eyewear (rechargeable type)
To charge when the TV is in the Standby mode
POWER
INPUT
SD CARD
TV AV
MENU ASPECT
INFO
EXIT
OPTION RETURN
R G Y B
TEXT STTL INDEX HOLD
abc def
ghi jk l mno
pqrs tuv wxyz
MUTE LAST VIEW
VOL CH
POWER CH
REC
TV
To charge when the TV is on
1. Turn off the television power, and set the 3D Eyewear power switch to "OFF"
2. Connect as shown above, and turn on the television power
•
The indicator lamp of the 3D Eyewear lights red, and charging starts.
•
When the indicator lamp turns off, charging is complete. (Approximately 2 hours required)
3. Turn off the television power, and remove the charging cable
Storage and Cleaning
•
Clean using a soft, dry cloth.
Wiping the 3D Eyewear with a soft cloth that is covered in dust or dirt may scratch the eyewear. Shake
off any dust from the cloth before use.
•
Do not use benzene, thinner, or wax on the 3D Eyewear, as doing so may cause the paint to peel off.
•
Do not dunk the 3D Eyewear in liquid such as water when cleaning.
•
Avoid storing the 3D Eyewear in hot or highly humid locations.
•
During the long period of disuse, full charge the 3D Eyewear once every 6 months to keep the battery
performance.
Note
•
As the liquid crystal shutters (lens) are fragile and easily broken, be very careful when cleaning them.
28
1. Display the menu
MENU
"How to Use the Menu Functions" (p. 34)
2. Select [Setup]
3. Select [Other Settings]
System Menu
Other Settings Access
4. Select [USB Charge in Standby] and set [On]
Other Settings
Off
USB Charge in Standby
On
Power Save
5. Turn off the television power, and set
the 3D Eyewear power switch to "OFF"
6. Connect as shown
7. Remove the charging cable
select
2/2
access
select
[USB Charge
in Standby]
access
USB connector
Mini USB connector
select
[On]
store
•
The indicator lamp
lights red, and
charging starts.
•
When the
indicator lamp
turns off, charging
is complete.
(Approximately 2
hours required)